Novel Use of Premixed Dialysate Bags during Water Supply Interruption in Acute Hospital Setting.

Patients on dialysis are exposed to large amounts of water during conventional intermittent hemodialysis; hence, there are strict regulations regarding the quality of water used to prepare dialysate. Occasionally, water systems fail due to natural disasters or structural supply issues, such as water-main breaks or unplanned changes in municipal or facility water quality. It is critical to regularly monitor and immediately recognize such a failure and take steps to avoid exposing the patients to contaminants. In addition to the recognition of the problem, the ability to pivot and continue to provide safe treatment to inpatients who are dependent on dialysis is essential, both from an ultrafiltration and a clearance standpoint. At our hospital, an unforeseen water disruption occurred and we were able to continue to provide KRT with premade, bagged dialysate to mitigate the effect on our patients on dialysis. This is a novel method using available machines and dialysate, which we normally stock for continuous KRT, for short dialysis sessions. The methodology is similar to that which has been widely used for short daily home hemodialysis with low dialysate flow rate. Because this situation occurred in the midst of the SARS-CoV-2 pandemic, we had to be mindful of dialysate volumes and staffing time. Here, we present our investigation into the cause of the water-system failure and how we quickly implemented the alternative dialysis method. Short dialysis with low-flow dialysate will not deliver the same Kt/V per session as standard dialysis; however, this method was successfully implemented and tailored with adjustments for patients requiring higher clearance for specific indications, such as severe hyperkalemia.

Adsorption of Uremic Toxins Using Ti3C2Tx MXene for Dialysate Regeneration.

The COVID-19 pandemic has become a major worldwide crisis. Although respiratory symptoms are a key feature of the disease, many people who are hospitalized with COVID-19 also suffer acute kidney injury, a condition that exacerbates patient mortality and may have to be treated through renal replacement therapy. Much of the focus on hospital capacity during the pandemic has centered on the availability of ventilators. However, supplies for dialysis treatment, including dialysate, have also run dangerously low in hospitals at the epicenter of the pandemic. Therefore, there is an urgent need to develop materials that can efficiently and rapidly regenerate dialysate, removing toxins and restoring electrolyte concentrations so that this vital resource remains readily available. In this work, Ti3C2Tx, a two-dimensional transition-metal carbide (MXene) that is known to efficiently adsorb urea, was used to remove creatinine and uric acid from an aqueous solution and dialysate, with a maximum adsorption capacity of 45.7 and 17.0 mg/g, respectively. We systematically analyzed and modeled the adsorption kinetics, isotherms, and thermodynamics, thus determining the rate-limiting step and adsorption mechanism. A fixed-bed column loaded with Ti3C2Tx was designed to further evaluate the adsorption performance under continuous fluid-flow conditions, mirroring conditions of continuous renal replacement therapy modalities. The maximum capacity and 50% breakthrough volume were calculated to further approach the practical application of Ti3C2Tx for removal of uremic toxins. Our findings suggest that Ti3C2Tx has the potential to be used as an efficient sorbent for the regeneration of dialysate, allowing for accelerated dialysate regeneration by removing filtered toxins and leading to more portable dialysis devices.